Getting additional installs over the Internet.

Note: Whenever you see A:, B:, C: or D: within this text, A: and B: represent your possible floppy drives within your computer and C: and D: represent your possible hard disks within your computer. If you only have one (1) floppy drive, it is the first drive in your computer and considered A: - your hard disk would then be considered C:.

A: and B: can be switched in any example below to meet the needs of your computer system.

C: and D: can be switched in any example below to meet the needs of your computer system.

----------------------
Getting Extra Installs over the Internet
----------------------

To reset a program disk over the internet we must do two things. 1) open the RESET program in a temporary DOS window and start the reset procedure there. 2) leave this temporary DOS window open until the reset code is sent to you from our offices in the US. Then, you simply type in the reset code and you will have the extra installs.

Note: The disk #1 must stay in drive A during this time and the computer can not be turned off or RESET - otherwise, we have to start all over again.

Instructions...
---------------
Put disk #1 into drive A
Open Windows Explorer (or the FileManager - WINFILE.EXE)
Go to the A drive and open the RESET.EXE file
Type in the name of the CSF program you have
CSF Samurai = CSFWIN
CSF Gakuto = CSFWIN
CSF Master = CSFM
CSF V2 = CSF
Wait for the DETAILED USER CODE (a total of six numbers).

Now, E-mail me (BMatheny@ment.com) with the DETAILED USER CODE numbers. Do not close this temporary DOS window!!!.

I will return a set of twelve numbers (the DETAILED RESET CODE). Type them into the DOS window where it asks for the DETAILED RESET CODE and press . You should see a message that reads "The installation counter of selected program has been changes. Press [R] to Restart, or [E] to Exit.". Press E and you are done.